OquMail
Loading account…
DNS & Setup9 min readUpdated

STRATO DMARC and DNS Setup: MX, SPF, DKIM Step by Step

STRATO DMARC setup step by step: switch off the STRATO DMARC and SPF rules, add MX with a trailing dot and DKIM at its prefix, then check with free tools.

To add your own DMARC record at STRATO you first switch off STRATO's built-in DMARC rule, which is active on every domain by default, and then save a TXT records (short text lines in DNS used for email security) with the prefix _dmarc. SPF works the same way, and the MX records (the settings that tell the internet where to deliver email for your domain) needs STRATO's own-mail-server switch plus a hostname that ends in a dot. This guide gives the exact menu path on strato.de and STRATO's other country sites, with the German labels in brackets, and sets up all five DNS records for business email on OquMail.

Quick answer

Log in to STRATO, open Domains, Domain management (Domainverwaltung), click the cogwheel next to the domain and open the DNS tab. Under the MX records (the settings that tell the internet where to deliver email for your domain) choose Personal mail server (Eigener Mailserver) and enter mail.oqumail.com. with the final dot. Under TXT and CNAME records choose No STRATO SPF rule and No STRATO DMARC rule, then add four TXT records: the OquMail ownership record and SPF, both with an empty prefix, DKIM with the prefix oqumail._domainkey, and DMARC with the prefix _dmarc. Save each with Accept settings (Einstellung übernehmen) and allow up to 24 hours.

The five DNS records OquMail needs

  • Ownership (TXT at @) — oqumail-verification=… (your own token is shown in the OquMail dashboard; it proves the domain is yours)
  • MX — host @, value mail.oqumail.com, priority 10
  • SPF (TXT at @) — v=spf1 MX (Mail Exchanger — where incoming email is delivered) a:mail.oqumail.com ~all
  • DKIM (TXT at your selector ._domainkey) — v=DKIM1; k=rsa; p=… (the exact key is shown in your OquMail dashboard)
  • DMARC (TXT at _dmarc) — v=DMARC1; p=none; rua=mailto:dmarc@yourdomain.com

Before you start

  • Create a free OquMail workspace and add the domain. The dashboard shows the five DNS records with your own ownership token and DKIM key; keep that tab open while you work in STRATO.
  • If you use STRATO mailboxes today, list the addresses. STRATO says existing mailboxes and their mail stay in place when you set your own MX records (the settings that tell the internet where to deliver email for your domain), but new mail stops arriving there.
  • Copy any mail you want to keep over IMAP before or right after the switch; our mailbox backup guide shows how.
  • Check that STRATO runs the DNS. If the domain's nameservers point somewhere else, add the records at that DNS host instead; the values are the same.

Step 1: open the DNS settings

  1. Log in to the STRATO customer login (Kunden-Login).
  2. Go to Domains, then Domain management (Domainverwaltung).
  3. In the domain list, click the cogwheel (Zahnrad) next to your domain.
  4. Open the DNS tab. Each record type has its own row with a manage (verwalten) link.

Step 2: point the MX record at OquMail

STRATO does not ask for a numeric priority. Each server has a drop-down next to it, and any primary server always ranks above a backup. With a single server the drop-down makes no difference, so the priority 10 shown in the record list does not need to be typed anywhere.

  1. Click manage next to the MX records (the settings that tell the internet where to deliver email for your domain) (MX-Record verwalten).
  2. Switch from STRATO's mail servers to Personal mail server (Eigener Mailserver).
  3. In the first server field enter mail.oqumail.com. including the final dot. STRATO's help asks for the trailing dot on mail server names.
  4. Leave the backup mail server fields empty.
  5. Click Accept settings (Einstellung übernehmen).

Step 3: add the ownership record

The ownership record is a TXT records (short text lines in DNS used for email security) at the root of the domain that proves the domain is yours. OquMail's Verify needs it together with the MX records (the settings that tell the internet where to deliver email for your domain) before the domain counts as verified, so add it in the same visit.

  1. Back on the DNS tab, click manage next to TXT and CNAME records (TXT- und CNAME-Records). This screen also holds the SPF, DKIM and DMARC settings.
  2. Click Create another record (Weiteren Record erstellen). Set Type (Typ) to TXT and leave Prefix (Präfix) empty.
  3. In Value (Wert), paste the line from your OquMail dashboard that starts with oqumail-verification=, with your own token after the equals sign.
  4. Click Accept settings. This record is not an SPF record, so it sits beside the SPF record at the root without any conflict.

Step 4: replace STRATO's SPF rule

SPF (Sender Policy Framework) lists the servers allowed to send as your domain. STRATO allows only one SPF record per domain, and saving your own switches the STRATO rule off. If another service also sends as your domain, such as a newsletter tool, merge it into this one record rather than adding a second; see fixing multiple SPF records.

  1. On the same TXT and CNAME screen, in the STRATO SPF rule options, select No STRATO SPF rule (Keine STRATO SPF-Regel). The other choices, Default STRATO mail server and the FAIL and SOFTFAIL options built from the MX entry, generate a record that does not match OquMail's exactly.
  2. Click Create another record. Set Type to TXT, leave Prefix empty, and paste v=spf1 MX (Mail Exchanger — where incoming email is delivered) a:mail.oqumail.com ~all into Value.
  3. Click Accept settings.

Free business email on your own domain

OquMail gives you up to 15 mailboxes on your domain — free — with guided SPF/DKIM/DMARC, webmail, IMAP/SMTP for any mail app, and a send API. Setup is a few DNS records; changes usually take effect within minutes, occasionally up to 48 hours. Start at oqumail.com.

Get started free

Step 5: add the DKIM record

DKIM (DomainKeys Identified Mail) is a signature that proves a message really came from your domain. The key is long because it is a 2048-bit key; if a checker later reports a broken key, the value was cut short or a line break crept in, so paste it again. For what the first part of the prefix means, see what a DKIM selector is.

  1. On the same TXT and CNAME screen, click Create another record again.
  2. Type: TXT. Prefix: oqumail._domainkey, which is the selector shown in your OquMail dashboard followed by ._domainkey. Do not type your domain; STRATO adds it automatically.
  3. Value: copy the whole DKIM value from the dashboard, from v=DKIM1; k=rsa; p= to the last character of the key, as one line with no added spaces.
  4. Click Accept settings.

Step 6: switch off STRATO's DMARC rule and add yours

This is the step behind most "DMARC at STRATO" questions. STRATO turns on a standard DMARC rule (STRATO Standard DMARC-Regel) for every domain, and its help pages list choosing No STRATO DMARC rule as the first step before you add your own. Start your own record at p=none, which asks receivers to send reports without blocking anything while you confirm that all your mail passes. STRATO's help example uses p=quarantine; that is a good later step, not day one of a move. Our DMARC guide for beginners explains when to tighten it.

  1. On the TXT and CNAME screen, find the DMARC setting and select No STRATO DMARC rule (Keine STRATO-DMARC-Regel).
  2. Click Create another record. Type: TXT. Prefix: _dmarc. Value: v=DMARC1; p=none; rua=mailto:dmarc@yourdomain.com, with your own domain after the @.
  3. Click Accept settings.
  4. Create a mailbox or a group called DMARC (a policy that tells providers what to do if someone fakes your domain)@ in OquMail so the daily reports have somewhere to land, or change rua to an address that already exists.
  5. To go back to STRATO's standard rule later, you must first delete every TXT records (short text lines in DNS used for email security) with the _dmarc prefix.

STRATO pitfalls that break email

  • No dot at the end of the MX hostname. STRATO's help asks for mail.oqumail.com. with the final dot; without it the record may not point where you expect.
  • The full name typed into Prefix. STRATO appends the domain itself, so _dmarc.yourdomain.de in the Prefix field becomes _dmarc.yourdomain.de.yourdomain.de. Type only _dmarc or oqumail._domainkey.
  • A STRATO rule left on. The SPF rule and the DMARC rule are separate settings; check that both say No STRATO rule after you save.
  • STRATO kept as a backup mail server. A backup accepts mail when the main server is briefly unreachable, and STRATO says it holds such mail for up to 5 days before returning it. Sending servers already retry on their own for days, so leave the backup empty.
  • Subdomains without SPF. STRATO says subdomains do not inherit the SPF record of the main domain; if you send from a subdomain, give it its own SPF record.
  • CNAME confusion. STRATO allows CNAME records only on subdomains, and a name with a CNAME cannot hold any other record. None of the five OquMail records is a CNAME, so this only matters for other services.
  • Nameserver changes blocked. STRATO will not let you edit the NS record while your own MX, A or SPF record is set, and NS cannot be changed at all on .es, .fr and .be domains. On those, add the records in STRATO's DNS as shown here.
  • Impatience. STRATO states up to 24 hours before every change is active.

Check the records with free tools

  • MX: run the domain through the MX lookup. It should show mail.oqumail.com and nothing from STRATO.
  • SPF: the SPF checker should find exactly one record, v=spf1 MX (Mail Exchanger — where incoming email is delivered) a:mail.oqumail.com ~all.
  • DMARC: the DMARC checker should show p=none and your rua address, not STRATO's standard policy.
  • Everything at once: click Verify in the OquMail dashboard. It checks all five DNS records, including the ownership TXT and DKIM, and names any that are missing or wrong. The domain counts as verified once ownership and MX resolve; SPF, DKIM and DMARC are what make your sent mail pass checks.
  • Last check: send a message from webmail to a Gmail address, open it, choose Show original, and confirm that SPF, DKIM and DMARC all say PASS.

OquMail connection settings

  • Incoming (IMAP): mail.oqumail.com, port 993, SSL/TLS
  • Outgoing (SMTP): mail.oqumail.com, port 587, STARTTLS
  • Username: your full email address (you@yourdomain.com)
  • Password: the same password you use for OquMail webmail

STRATO in other countries

STRATO runs the same panel on its other country sites, including strato.nl, strato.es, strato.fr, strato.se and strato-hosting.co.uk. The layout matches the German one: Domains, Domain management, cogwheel, DNS tab. The labels are translated, so match them by position if your panel is in Spanish, Dutch or French; the record values are identical everywhere. One difference matters for Spanish, French and Belgian customers: on .es, .fr and .be domains STRATO does not let you change the nameservers, so the records must be added in STRATO's own DNS exactly as described above.

Common questions

How do I set up DMARC at STRATO?

On the TXT and CNAME records screen, select No STRATO DMARC rule, create a TXT records (short text lines in DNS used for email security) with the prefix _dmarc and a value such as v=DMARC1; p=none; rua=mailto:dmarc@yourdomain.de, and click Accept settings. Check it with a DMARC checker after a few hours.

Why does STRATO not accept my SPF record?

STRATO allows one SPF record per domain, with at most 10 references to other records. If the STRATO SPF rule is still selected, or a second record starting with v=spf1 exists, merge everything into one record and set the rule to No STRATO SPF rule.

¿Cómo configuro el registro DMARC en STRATO?

En el panel de STRATO abra Dominios, la administración de dominios, la rueda dentada junto al dominio y la pestaña DNS. En los registros TXT y CNAME desactive la regla DMARC de STRATO, cree un registro TXT con el prefijo _dmarc y el valor v=DMARC1; p=none; rua=mailto:dmarc@sudominio.es, y guarde. En dominios .es no se pueden cambiar los servidores de nombres, así que los registros se añaden en el DNS de STRATO.

Want to see how your own domain is set up? Use the free SPF checker, DMARC checker and MX lookup: they run in your browser and store nothing.